Hello Kurt,

01 May 24 19:16, you wrote to August Abolins:

 KW>   Re: trying to bridge/link two routers wi
 KW>   By: August Abolins to Digimaus on Wed May 01 2024 09:43 pm

 >> Anyway.. I decided to feed ethernet after all.  The result ain't
 >> 100% pretty, but about 80% looks fine after my hack install.  There
 >> is a small section that needs to cross about 4 ft of carpet. I can
 >> probably cover that with a proper cable cover.  Then there is about
 >> another 8 ft that can sit loose under a counter to the switch that
 >> feeds the rest of my wired network.


 KW> You won't regret it. I tried extenders and 2 different generations of
 KW> powerline adapters and ran into niggling issues each time. I had 2
 KW> Cat6 runs put in between floors (and I'm glad I had them done
 KW> professionally!) and have an AP on one floor that also serves as a
 KW> switch for my homelab, and another router on the other end that's an
 KW> internet gateway. It's trouble-free.

this ^
any other hacks/extenders are just sh1t

Regards,
--
dp

-=>> telnet://bbs.roonsbbs.hu:1212 <<=-

... Uptime: 4d 11h 33m 34s
--- GoldED/2 1.1.4.7+EMX
 * Origin: Roon's BBS - Budapest, HUNGARY (618:520/10)