AT2k Design BBS Message Area
Casually read the BBS message area using an easy to use interface. Messages are categorized exactly like they are on the BBS. You may post new messages or reply to existing messages!

You are not logged in. Login here for full access privileges.

Previous Message | Next Message | Back to DOS VBBS running under OS/2  <--  <--- Return to Home Page
   Local Database  DOS VBBS running under OS/2   [27 / 65] RSS
 From   To   Subject   Date/Time 
Message   Michael Gleason    Jim   Problem!   April 2, 1996
 7:42 AM *  

Re: Problem!

> I am running OS/2 Warp Connect, but when i need to make a VNET connect I need
> to reboot, my uucp connect is fine but it says
> recieving ID***************ERROR
> recieving ID***************ERROR
> but the thing is that i checked with my server and the passwords are ok.
> Can you help????
> Jim

okay I have an idea but when you boot up the first thing I'd suggest you do
is type mode com? for each com port you are using. Write this info down.

Now if you are getting those recieving ID************ERROR! messages on a
Vnet connect *AFTER* you do a UUCP connect then I would again type in mode
com? (With the ? being the com port number that you did the UUCP connect with.

I'll bet that TO = ON. when you do a mode after the UUCP connect.
If it is then you have the problem right there!

If you need more information please let me know! I can explain more if need
be.

Mike OVERSEER
Host of Beginning C programmer echo

P.S. Type mode com? from an OS/2 command line.
  Show ANSI Codes | Hide BBCodes | Show Color Codes | Hide Encoding | Hide HTML Tags | Show Routing
Previous Message | Next Message | Back to DOS VBBS running under OS/2  <--  <--- Return to Home Page

VADV-PHP
Execution Time: 0.0152 seconds

If you experience any problems with this website or need help, contact the webmaster.
VADV-PHP Copyright © 2002-2024 Steve Winn, Aspect Technologies. All Rights Reserved.
Virtual Advanced Copyright © 1995-1997 Roland De Graaf.
v2.1.241108