Re: Ok

>  I would need to have some idea of what programs and what hardware (If any)
> they are trying to address when the error occurs. Plus, your machine specs
> would always be helpful!


(config.sys)

DEVICE=C:\DOS\HIMEM.SYS  /testmem:off
DEVICE=C:\DOS\EMM386.EXE NOEMS i=e000-efff
DOS=HIGH,UMB
buffers=30,8
files=80
FCBS=4,0
DEVICEHIGH=C:\DOS\SETVER.EXE
DEVICEHIGH=C:\DOS\ANSI.SYS
SHELL=C:\DOS\COMMAND.COM /p /e:1024
DEVICE=C:\WINDOWS\IFSHLP.SYS
DEVICE=C:\WINDOWS\SMARTDRV.EXE /DOUBLE_BUFFER
STACKS=9,256



(Autoexec.bat)

@ECHO OFF
BNU /L1,38400,8N1 /Z0 /F+
SET TEMP=C:\TEMP
SET DSZLOG=C:\VBBS\DSZ1.LOG
SET dszopt=-m
PATH C:\;C:\WINDOWS;C:\DOS;C:\BATCH;
LH C:\DOS\DOSKEY
LH MOUSE
PROMPT $P$G
cd\windows
WIN

The machine is a ACER 486SX33 Intel Processor, with a SVGA monitor ( Video
Card Unknown) 170Meg Hd (doublespaced to 340), 4 megs of System RAM, ZOOM
28.8 VFC Internal faxmodem, Creative Labs SBPRO.  As to the errors they occur
randomly and only while using DOS based programs.  These can be anything, a
dos game, Dos editor (no difference if it is selected itself from windows or
If I use the MSDOS Icon and use the editor within it)  No hardware is
necessarily being accessed directly.  I really have no idea, I thought perhaps
that I had a corrupted copy of Windows 3.1 and I deltree'd it and reinstalled,
and no difference, when I upgraded to WFWG no difference.  Also, If I try to
quit windows and attempt to run a program without rebooting I get an Error
message from EMM386 and I am forced to reboot.  Any help would be greatly
appreciated.  Also, as I said this happens just all of a sudden and not every
time, everything works well a few times after I reboot then it starts all over
again.

'Ratchet

�-�-��-�-�- [MESSAGE STATUS]: Reply Requested by NURSE RATCHET �-�-��-�-�-