Re: No Lan here...

>      The data dir should only be used for CONTROL.DAT.  And remember that any
> files you edit on the hard drive must be copied to the ramdrive if you are to
> update them.  Also make sure that you have the paths set to the ramdrive in
> Paths Configuration within VCONFIG.
>      And thanks for that last round of tips on WFW, Matthew.  Some insightful
> stuff.
>  The Jungle | Dallas | internet@net-works.com | MultiNet | VirtualNet@1214006

 Another good idea is to compile scripts with a batchfile that passes the
filename as a param and then copies it to the RAM drive. That way you won't
forget to do it then go nuts trying to figure out why a script change isn't
working at 3:00am. Something like:

-----c.bat-----
vcom %1
copy %1 x:\v /v
-----end-------

then just run it from a prompt or a configurable shell with:

c scriptname



:
                                                   Matthew Wood

- 509.487.8426 - @net-works.com - Spokane,WA - IP = 199.79.239.45
-FREQ your EMERALD.ZIP Today! Internet Ngroups & E-mail VIA * EMERALDNET