Re: Adding FTN networks

> Re: Adding FTN networks
>
> > So how do I 'install' an added Network? It was not one of the ones alrea
> > listed (JustaXNet). So I added it as a Type4 Fido-type network, but it d
> > to not installed. I went into the configs and don't see anyway to select
> > installed.
> >
> > In my Fido configuration, I added my JustaXNet node number as an alias.
> > added my hub to the mail routing for that zone, etc..
>
> For it to show installed, you network entry should have the zone set to 510.
> Then in the FIDOnet configuration, you add a AKA entry with your node number
> (510/y). It should then show as installed. Installed networks have a NET.x
> file in the data directory where x is the network number.
>
> Steve
>
>
> --
> [AT2k] -- Your VBBS/VADV Support Center -- [www.at2k.org] -- [bbs.at2k.org]

Thanks Steve.. It was a typo. I had 500 instead of 510 in one of the spots.

/\/\Diamondback BBS <><> 1:114/271 510:441/7 1623000/\/\
\/\/http://dbackbbs.com <> telnet://bbs.dbackbbs.com\/\/